HUD Head-up Display Speedometer Auto Car GPS Cigarette Lighter Speed Projector

Description

Product Introduction:
A smart GPS multi- functional horizontal speedometer for driving, fully supports high-precision monitoring of car speed, vehicle tilt angle, vehicle pitch angle changes, compass, altitude, latitude and longitude, time and car battery voltage status, to escort your driving safety.
Features:
1.Applicable to domestic cars, Asian cars, American cars and European cars.
2.Equipped with high-precision satellite GPS signal module.
3.Automatically monitor vehicle driving conditions.
4.Adjust the brightness of the screen by using the sensitivity of the light sensor.
5.Free rotation, which is more sensitive.
6.It adopts color HD LCD display with high resolution.
7.Carbon fiber appearance body design.
8.Start automatically when the vehicle starts, sleep mode starts automatically after vehicle parking.
Product Function:
1.Precisely shows vehicle tilt angle with clear notification, when the angle is over 40°, alarm alerts.
2.Precisely shows vehicle pitch angle changes,when the angle is over 40°the alarm alerts to ensure your safety.
3.Vehicle speed from GPS satellite signal.
4.Altitude measurement and display.
5.Latitude and longitude measurement and display.
6.Compass display.
7.Satellite time display.
8.Fatigue driving alarm alerts after driving for 4 hours.
Product Parameters:
Power
DC 10V ~ 30V
Working Temperature
-40℃ ~ +80℃
Depression& Elevation angle
-40°~ +40°
Roll Angle
-40°~ +40°
Clock Error Value
＜ 1minute
Voltage Measurement Range
DC 5V ~ 30V
Voltage measurement accuracy
0.5V
Speed Accuracy
＜ 0.36Km/h
GPS Cold Boot Time
32s（平均）
GPS Hot Boot Time
1s（平均）
GPS Data Refresh Time
1s
Wireless Transmission Frequency
2.4GHz
Product Size
70*59*59
（mm）
Weight
203g
Product analysis:
â‘ Speed / Latitude& Longitude â‘¡ Roll Angle â‘¢ Setting Button â‘£ Start Button
⑤ Pitch Angle ⑥ Compass
Product Instructions:
1.Park the car on a horizontal surface, stick the adhesive on the product, adjust and fix it in the vehicle for easy horizontal view.
2.Before driving, connect the power supply and wait to receive the satellite GPS signal until the data shows normal.
3.Long and hold the setting button and click the start button to adjust the clock minutes.
4.Press and hold the start button, and click the setting button to adjust the clock hours.
Tips:
The GPS GO-2 receives GPS signals through satellite transmission.Large obstructions such as the underground parking lot, tunnels, high-rise buildings, etc. will interfere the GPS signal searching, which normally lead to failure to read the speed data. Meanwhile, there is a certain error of altitude data within a range of 5 to 100 meters in low altitude areas, which is because of the GPS signal, and please be cautious that GPS signal can be delayed.